Best rifle scope phone mount: Top Picks for Clear Recording and Fast Setup

The Forevercam adapter comes with six lens locking rings, covering eyepieces from 40mm to 46mm. Its aluminum construction is lightweight, waterproof, and corrosion-resistant, making it suitable for demanding environments.

The mount syncs recording and aiming through its high-definition eyepiece and includes a protective box with extra accessories like a beam splitter lens and rubber cap. Video quality is generally good, but depends heavily on the phone and scope pairing.

Despite its adaptability, the mount can’t accommodate oversized phones such as the Samsung Galaxy S23 Ultra, forcing users to switch to smaller models. Mirror quality is a recurring issue, making it difficult for phones to focus on the reticle and requiring constant adjustment before each shot.

Installation is straightforward for scopes of different sizes, but results are inconsistent when recording with large or high-end smartphones. This mount commands a higher price than budget options, justified by its accessories and build quality.

It is best for shooters with mid-size phones and scopes needing multiple diameter solutions. Skip this if you use a large phone or need crisp, quick reticle focus during recording.

The SOLOMARK adapter stands out for its compatibility, fitting eyepieces from 37mm to 45.5mm and phones up to 100mm wide. Its aluminum build and plastic screws avoid scratching your scope, and the soft padding protects your phone.

It reliably holds most single-lens phones in place, and reviewers used it successfully on crossbows and spotting scopes. Once properly set up, it captures clear scope footage and keeps the phone secure for steady recording.

Setup demands patience, especially on phones with multiple cameras or when using zoom. Phones like the iPhone 11 Pro often require removing the case to fit, and camera alignment can be tricky, multi-lens phones may switch cameras when zooming, making recording unpredictable.

Adjusting the mount for different magnifications means frequent realignment, and the mount does not stay steady under heavy recoil. It works better on low-recoil rifles or for static observation.

Build quality is decent for the price, but not flawless. The mount can feel cumbersome and does not fit all scope sizes, especially very large ones.

Durability is adequate for occasional use, but it has been described as ‘goofy’ and ‘poorly made’ by some, with reports of components loosening after repeated use. Skip this if you need quick, reliable setup or plan to use a multi-lens phone.

The Scope Smartphone Adapter fits eyepieces from 33mm to 46mm and phones up to 100mm wide, making it versatile for rifles, telescopes, and crossbows. Its anodized aluminum frame and six plastic screws keep the phone and scope safe from scratches, and it can mount large phones like the iPhone XR securely for ground hunts.

Setup is straightforward for basic use, and the mount is sturdy enough for predator hunts and educational purposes. The main drawbacks are its slow, technical setup and tendency to pop off under significant recoil.

Centering the phone camera takes patience, especially for beginners, and the mount can detach if used on guns with substantial kick or in unstable positions like tree stands. The adjustment mechanism is described as complicated, requiring careful alignment every time.

It works best for static shooting or low-recoil rifles and is not recommended for heavy-duty field use. Build quality is decent but not exceptional, with some complaints about poor manufacturing.

For its price, it delivers acceptable results for recording shots or teaching accuracy, but it is not designed for rugged or fast-paced use. Those seeking a quick, stable mount for high-recoil firearms or rapid repositioning should look elsewhere.

The Aluminum Scope Phone Adapter features a screw-free, twist-install design for quick setup in the field, fitting eyepieces from 33mm to 46mm and phones between 54mm and 104mm wide. Its dual viewing angles let you record through the phone or view directly through the scope, which is useful for guided hunts or accessibility needs.

The nylon ring clamp holds firmly and padded surfaces protect your smartphone. The build quality is described as premium with a solid aluminum frame.

Setup can be tricky, especially on scopes with fast focus eyepieces that protrude, as the mount may rotate under the phone’s weight. The adapter takes up a lot of eye relief, forcing your eye close to the aluminum, hazardous on recoiling guns, so it’s best suited for rimfire or muzzle-braked rifles.

Clarity is decent, but internal lens elements slightly reduce brightness. The mount is stable for static use, but moving or firing causes levers to shift if not perfectly tightened.

Instructions are lacking, making initial setup challenging for first-time users. The mount’s length and eye relief limitations mean it’s not suited for traditional shooting on high-recoil rifles.

Skip this if you need a simple, one-size-fits-all solution or plan to use it on powerful hunting rifles.

The Barrel Scope Phone Clamp Mount attaches to tubes or barrels from 13mm to 60mm diameter and holds up to 1.5kg, making it highly versatile for rifles, tripods, or handlebars. Its quick adjustment knobs and 360-degree ball head allow fast repositioning and angle changes.

The aluminum alloy construction is lightweight and includes a dense rubber pad to prevent scratches, holding large phones like the Galaxy S22 Ultra securely in place. The mount works well for hunters and outdoor enthusiasts wanting to capture video from various perspectives.

It is easy to use and grips tightly, but cannot fit scopes thicker than 1.5 inches or smooth surfaces, as the clamp may slide off. Some reviewers found the clamp bulky, but appreciated its reliability for tripods and lighter devices.

Durability is inconsistent, with reports of the mount breaking during first use or the screw failing to tighten. This mount is best for those seeking a quick, flexible solution for multiple devices and mounting positions.

Skip this if your rifle scope is thick, smooth, or you need a strong product for heavy-duty use.